Glass shower doors are an attractive addition to any bathroom, but can be extremely hard to maintain. Glass surfaces are susceptible to water spots, which makes your shower doors look dirty even if they are clean.

The main cause of water spots is minerals in hard water. These minerals can come from the pipes in your home or from natural deposits in the water supply. Hard water is more likely to leave water spots on your glass shower doors because it has more minerals than softer water sources like rainwater or bottled water.

This article will provide some simple tips on how to keep water spots off glass shower doors. Here’s how to keep glass shower doors from spotting!

I may earn a small commission for purchases made through links in this post at no cost to you. Thank you for supporting Frugal Home Addict! Learn more about my disclaimer policy here.

How To Keep Glass Shower Doors From Spotting

1. Waterproof your shower doors with a water repellent coating.
2. Use a squeegee to dry off the glass after every shower.
3. Attach a hard water filter to your shower head.
4. Clean your shower doors regularly with a glass cleaner.

Best Products To Keep Water Spots Off Glass Shower Doors

1. Water Repellent Coating

A water repellent coating is a great way to keep water spots off glass shower doors. It creates an invisible barrier that causes water to bead and slide off of surfaces. For best results, make sure to clean the glass with a glass cleaner or hard water stain remover before applying the coating.

To prevent spotting, try using this Shower Door Water Repellent from Rain-X. This product effectively prevents hard water stains, soap scum, and grime build-up on glass shower doors. It keeps glass surfaces looking clean even weeks after application!

Here’s how to keep water spots off glass shower doors using Rain-X:

How To Keep Glass Shower Doors From Spotting With A Water Repellent Coating

1. Ventilate the bathroom well. Open windows and turn on the exhaust fan. Wear gloves and a mask.
2. Before applying the coating, your glass shower doors should be clean and spotless. If needed, use a glass cleaner or hard water stain remover. Make sure the shower doors are completely dry before treating the glass.
3. Apply a small amount of water repellent coating onto a clean microfiber cloth. In a circular, overlapping motion, firmly wipe the product onto your glass shower doors. Coat the entire glass surface.
4. Wait for the coating to dry. When you see a slight haze, apply a second water repellent coating using the same method in Step 3.
5. Using a clean microfiber cloth, wipe off the product until the glass shower doors are completely clear. Ventilate the bathroom well to get rid of odors. For long lasting results, make sure to reapply the coating every couple weeks.

2. Squeegee

A squeegee is a tool used to remove water from surfaces. To keep your shower doors from spotting, use a squeegee to clean the glass door after every shower. This is a great way to prevent hard water from drying on your glass shower doors and leaving spots behind.

To prevent spotting, try using this All-Purpose Shower Squeegee from Hiware. This product has a 10-inch wide rubber blade and effectively dries shower doors with a streak-free shine. It also comes with waterproof adhesive hooks so you can conveniently store it inside your shower!

Here’s how to keep glass shower doors from spotting with a squeegee:

How To Keep Water Spots Off Glass Shower Doors With A Squeegee

1. For best results, use a squeegee to dry your glass shower doors after every shower. Tip: Hang your squeegee inside the shower for easy access.
2. Starting at the top corner of the glass shower door, glide the squeegee steadily from top to bottom. Tip: After every swipe, wipe off the blade with a cloth to remove the excess water.
3. Move the squeegee slightly to the side, and repeat, overlapping the last path you’ve taken. Repeat this step until your glass shower door is completely dry.

3. Shower Head Hard Water Filter

Installing a hard water filter to your shower head is one of best ways to keep your glass shower doors from spotting. Hard water contains high levels of calcium and magnesium which can leave white spots on glass shower doors. A shower head hard water filter acts as a water softener to remove these minerals from your water.

To keep your glass shower doors clear, try using this Shower Head Hard Water Filter from Bwdm. This products purifies your shower water, removing chlorine, heavy metals, and other sediments. It has an advance 15 stage filtration system that quickly eliminates hard water from your shower.

As a bonus, softening hard water is a great way to keep your hair and skin looking healthy. This shower head filter also contains Vitamin C to help nourish skin and reduce dryness. Here’s how to keep water spots off glass shower doors with a shower head hard water filter:

How To Keep Glass Shower Doors From Spotting With A Hard Water Filter

The instructions below are for installing the Bwdm hard water filter to your shower head:

1. Rinse the hard water filter and remove the shower head. Place the provided rubber o-rings on the female and male fittings of the shower filter. Then, wrap teflon tape tightly around the threads of the hard water filter and shower arm.
2. Install and screw on the hard water filter onto the shower arm. Re-install the shower head by twisting it tightly onto the filter.
3. Before showering, allow water to run through the filter for 5 to 10 minutes to remove any carbon dust build up. For best results, replace the filter every several months.

4. Glass Cleaner

Water spots can form on the surface of glass shower doors in as little as a few days. To keep water spots off of them, try cleaning your glass shower doors once a week with a quality glass cleaner. This will help prevent the buildup of soap scum and hard water deposits that form water spots overtime.

I highly recommend using Hope’s Perfect Glass Cleaner. This product is 100% streak-free and does not leave behind any residue or haze. Although this glass cleaner does not contain ammonia, it is capable of breaking down mineral deposits left behind by hard water and soap scum.

Here’s how to keep glass shower doors from spotting with a glass cleaner:

How To Keep Water Spots Off Glass Shower Doors With A Glass Cleaner

1. For best results, clean your glass shower doors at least once a week with a glass cleaner.
2. Instead of spraying the cleaner directly on the glass, apply the product onto a clean microfiber cloth. In a circular motion, gently wipe down the glass doors until completely clear.

Removing Water Spots From Glass Shower Doors

In this post, you’ve learned several methods on how to keep water spots off glass shower doors. No matter how well you clean and dry your glass shower door, water spots may still form. The best way to remove these tough stains is to use a heavy duty hard water cleaner.

For removing water spots, I highly recommend using Bring It On Cleaner’s Hard Water Stain Remover. This product effectively eliminates water spots and soap scum from glass shower doors and other bathroom surfaces! Use it to remove calcium, mineral, and rust stains all over your home!

The hard water stain remover is non-toxic, chemical-free, and safe to use around kids and pets. It’s a great alternative to chlorine bleach cleaners and uses oxygen bleach to safely remove hard water spots. I love how it has a fresh mint scent!

How To Remove Water Spots From Glass Shower Doors

1. Wet a clean sponge. Apply a small amount of hard water stain remover on the damp sponge.
2. In a circular motion, gently rub the cleaning solution onto the glass shower doors. When the water spots are completely gone, rinse off the excess product with water. Dry off the glass with a clean microfiber cloth.

Summarized: How To Keep Glass Shower Doors From Spotting

In this post, I’ve gathered the best tips on how to keep glass shower doors from spotting. Here are all the recommended products in one convenient list:

• Rain-X Shower Door Water Repellent
• Hiware All-Purpose Shower Squeegee
• Bwdm Shower Head Hard Water Filter
• Hope’s Perfect Glass Cleaner

Conclusion

Water spots are an inevitable part of owning a glass shower door. Hard water is the most common cause of water spots. They can form when water droplets dry on the glass and leave behind mineral deposits.

Luckily, there are some things you can do to help prevent water spots from forming and keep them off for good! In this post, I’ve gathered the best methods on how to keep glass shower doors from spotting.

The Best Solution To Prevent Water Spots

The best way to keep your glass shower doors from spotting is to install a water filter on your shower head. A hard water filter acts as a water softener and removes minerals from your water. When there are no mineral deposits, there’s no water spots!

Another great way to stop water spots from forming on your glass shower doors is by keeping them as clean as possible. Clean the glass shower doors with a glass cleaner once a week. To reduce hard water build-up throughout the week, dry off your doors with squeegee after every shower.

I hope this post gave you some helpful tips on how to keep water spots off glass shower doors. Good luck!